Smoke Factory Spaceball II - 650 Watt Water-Based Fog Machine

Product Overview

Small and compact with impressive output. Always ready installed in a touring case, our most compact mains dependent fog machine comes along. Despite the low 650 Watt heating power, it has an enormous output that will amaze your guests. The compact dimensions allow the device to be placed in any small gap, so that it is usually not even noticed until the release. Since the Spaceball II, like all Smoke Factory devices, can be tilted to either side and operated, it is perfectly suited to create a fountain effect on stage in vertical operation. In combination with our Fast Fog EXTRA a CO2 similar effect is achieved. If, on the other hand, the Heavy Fog PLUS is used, the small device can quickly be used to fog a small detached house for a fire drill. The Spaceball II is equipped with all the technical refinements that Captain D. or Data II have. An integrated timer, control via the 3-pole analogue input, i.e. with an optionally available cable or radio remote control, via DMX512 or of course in stand-alone operation. The permanent temperature control on the microprocessors ensures that the evaporation temperature is always correct. This ensures that no harmful substances are produced by too hot evaporation or that the device "spits" unevaporated fluid. Like all Smoke Factory devices, the Spaceball II has a quick-release system that allows the canister to be changed within seconds.

Product Features

• Small and compact, but packed with latest digital technology: DMX, microprocessor, timer
• Reasonable output but low power consumption. Flight case included.
• High-tech in a little box. Ideal for small and medium jobs, dry hire, party, Top 40, mobile DJ

Product Specifications

• Procedure: Vaporizing Fog Generator
• Power: 650 Watts
• Power Requirement: 240 V/50 Hz (110 V version also available)
• Fluid Bottle Capacity: 750ml
• Fog Emission: 1% - 99% in 1% steps
• Fog Time: ~22 sec. on 100 %, continuous fog < 45 %
• Control Options: DMX, Stand-Alone, Timer, Analog 0-10V
• Heat-up Time: ~ 7 Minutes
• Temperature Control: Microprocessor-controlled
• Ambient Temperature: 41F to 113F
• Fluid Consumption: 60 ml/min. (max. output), 15 ml/min. (continuous)
• Weight: 17.6 lbs
• Dimensions: 13" x 8" x 13"