Smoke Factory Tour Hazer II "S" Phenol - 1500 Watt Water-Based Haze Machine
Smoke Factory Tour Hazer II "S" Phenol - 1500 Watt Water-Based Haze Machine
Product Overview
The Tour Hazer II is a Hazer with experience on stages all over the world. Due to the water-based fluid, a clean production of fine Haze is possible. The special fluid of the Tour Hazer allows us to minimize the consumption of the device. So the Tour Hazer II needs only 1 ml/min for 40% performance. A 5ltr. canister Tour Hazer Fog is therefore sufficient for 83 hours, i.e. 3.5 days of continuous Haze. On a lower setting, running times of up to 5 days of continuous Haze can be achieved with a 5 liter canister. Two DMX channels allow an individual effect that can be adjusted from very fine, barely visible Haze to fog-like output. With the standard Phenol Case, the device is set up within a few seconds after removing the case lid. Only 60 seconds after plugging in the power cable the Tour Hazer II is heated up and ready for use. The Phenol Case is manufactured in Germany and has been protecting our Hazer for over 10 years in the tough touring world. Another advantage of the Case designs is a start-up, in almost every position. Only on the side with the leather inlet, the device should not be tilted during operation. This means that the Tour Hazer II can also be optimally placed on small stages. With the variable air baffle, the Haze can still be steered in the desired direction. The use of high-quality materials guarantees a long lifetime of the device.
Product Features
- Even more quiet, even more precisely adjustable
- DMX serial-production
- 1500 W / 110 V / 60 Hz
- Integrated timer
- Low liquid consumption
- Only 1 minute warm-up time
- Small dimensions
- 3 liter fluid container
- Made in Germany
Product Specifications
- Procedure: Haze machine based on vapor, 1500 watt
- Power Requirement: 110V, 50/60Hz
- Fluid Capacity: 3 Liter
- Fog Emission: 1-99% in 1% intervals
- Fog Time: Continuous on 100%
- Control Options: DMX, Stand-alone, Timer, Analog 0-10V,
- Warm-up Time: 60 seconds
- Temperature Control: Microprocessor Controlled
- Ambient Temperature: 41F to 113F
- Fluid Consumption: 8.9ml/min (max output
- Dimensions: 19.68" x 10.62" x 10.62"
- Weight: 31.08 lbs